Streamlit real time

1 streamlit real time chart[편집]

1.1 샘플[편집]

https://github.com/akutlusenturk/DAQ_GUI
import streamlit as st
import time
import numpy as np
import pandas as pd

st.set_page_config(
 page_title='Sirkülasyon Testi',
 layout="wide",
 initial_sidebar_state="collapsed",
)

st.sidebar.markdown('''
### Sirkülasyon Testi
Yapılacak değişiklikler programı resetler.
''')

marka = st.sidebar.text_input("Pompa Markası:","Brand")
model = st.sidebar.text_input("Pompa Modeli:","Model")
mod   = st.sidebar.text_input("Çalıştırma Modu:","dP5.0")
zamandamgasi = time.strftime("]_%Y%b%d_%H.%M.%S")
isim = marka+"_"+model+"_["+mod+zamandamgasi

i = 0
t = 0

st.sidebar.write("Otomatik Vana Modunda Deney")
Dint = st.sidebar.number_input("Başlangıç Noktası:",value=15.0)
Dfin = st.sidebar.number_input("Bitiş Noktası:",value=70.0)
ds = st.sidebar.number_input("Adım Aralığı",value=0.25)
dt = st.sidebar.number_input("Adımlar Arası Periyot",value=8)

if st.sidebar.button("Otomatik Modda Kayıt Başlat"):
    kaydet = 1
else:
    kaydet = 0,
    
st.sidebar.write("Manuel Vana Ayarı")
D = st.sidebar.number_input("Vana Açıklığı [0:Kapalı -90:Açık]",value=0.0)
if st.sidebar.button("Ayarla"): 
    yaz(64,[int(D*4)])
    

    
sozluk =[
    ['Date'                   ,"Tarih"                  ,"YMD"       ,""         ],
    ['Time'                   ,"Zaman"                  ,"HMS"       ,""         ],
    ['Temperature'            ,"Sıcaklık"               ,"T"         ,"°C"       ],
    ['Flow_Rate'              ,"Debi"                   ,"Q"         ,"m³/saat"  ],
    ['Valve_Aperture'         ,"Vana Açıklığı"          ,"D"         ,"°"        ],
    ['Static_Pressure'        ,"Durağan Basınç"         ,"P"         ,"Bar"      ],
    ['Suction_Pressure'       ,"Emme Basıncı"           ,"P1"        ,"Bar"      ],
    ['Discharge_Pressure'     ,"Basma Basıncı"          ,"P2"        ,"Bar"      ],
    ['Voltage'                ,"Gerilim"                ,"V"         ,"V"        ],
    ['Current'                ,"Akım"                   ,"I"         ,"A"        ],
    ['Measured_Frequency'     ,"Ölçülen Frekans"        ,"f"         ,"Hz"       ],
    ['Active_Power'           ,"Aktif Güç"              ,"PAP"       ,"W"        ],
    ['Reactive_Power'         ,"Reaktif Güç"            ,"QRP"       ,"VAr"      ],
    ['Apperent_Power'         ,"Görünür Güç"            ,"SAP"       ,"VA"       ],
    ['Phase_Voltage_Angle'    ,"Faz Gerilim Açısı"      ,"PVA"       ,"°"        ],
    ['Phase_Current_Angle'    ,"Faz Akım Açısı"         ,"PCA"       ,"°"        ],
    ['Cos_Phi'                ,"Cos_Phi"                ,"PHI"       ,""         ],
    ['Power_Factor'           ,"Güç Faktörü"            ,"PF"        ,""         ],
    ['Differential_Pressure'  ,"Fark Basıncı"           ,"DP"        ,"Bar"      ],
    ['Head'                   ,"Basma Yüksekliği"       ,"H"         ,"m"        ],
    ['Hydraulic_Power'        ,"Hidrolik Güç"           ,"PHYD"      ,"W"        ],
    ['Efficiency'             ,"Verimlilik"             ,"ETA"       ,"%"        ]
    ]
    
varis = []
for i in sozluk: varis.append(i[0])  #sozluk ilk sütun  (Türkçe için 0 yerine 1. sütun seçilebilir.)
df = pd.DataFrame(columns=varis)
buffy = pd.DataFrame(columns=varis)



col = st.columns(4)
 

###################################### G R A F İ K L E R #############################################

col[0].subheader("Debi & Basma Yüksekliği [m³/h,m]  \n Flow Rate & Head")
QHt = col[0].line_chart()

col[0].subheader("Hidrolik Güç & Verimlilik [W,%] \n Hydraulic Power & eta")
PHYDETAt = col[0].line_chart()

col[1].subheader("Emme & Basma Basınçları [Bar] \n Suction & Discharge Pressure")
P1P2t = col[1].line_chart()

col[1].subheader("Elektrik Güçleri [W, VA, VAr] \n Active, Reactive & Apperent Power" )
PAPQRPSAP = col[1].line_chart()

col[2].subheader("cos(φ) & Güç Faktörü \n cos(φ) & Power Factor")
PHIPFt = col[2].line_chart()

col[2].subheader("Faz Gerilim & Akım Açıları [°] \n Phase Voltage & Current Angles")
PVAPCAt = col[2].line_chart()

###################################### M E T R İ K L E R ##############################################

col[3].write(f"Deney Kimliği: \n {isim}")
YMDt = col[3].empty()
HMSt = col[3].empty()
Tt = col[3].empty()
Dt = col[3].empty()
Pt = col[3].empty()
Vt = col[3].empty()
ft = col[3].empty()

##################################### D E M O ##########################################################

df = pd.read_excel("demo_data.xlsx",index_col=0)

######################################### D Ö N G Ü ####################################################

for i in range(len(df)):
    buff=df.iloc[i]

    with Tt:
        st.metric("Hat Sıcaklığı",f"{buff[2]} °C")
    with YMDt:
        st.metric("Tarih",buff[0])
    with HMSt:
        st.metric("Saat",buff[1])
    with Dt:
        st.metric("Vana Açıklığı",f"{buff[4]} °")
    with Pt:
        st.metric("Durağan Basınç",f"{buff[5]} Bar")
    with Vt:
        st.metric("Gerilim",f"{buff[8]} V")
    with ft:
        st.metric("Ölçülen Frekans",f"{buff[10]} Hz")
    
    QHt.add_rows([[float(buff[3]),float(buff[19])]])
    PHYDETAt.add_rows([[float(buff[20]),float(buff[21])]])
    P1P2t.add_rows([[float(buff[6]),float(buff[7])]])
    PHIPFt.add_rows([[float(buff[16]),float(buff[17])]])
    PAPQRPSAP.add_rows([[float(buff[11]),float(buff[12]),float(buff[13])]])
    PVAPCAt.add_rows([[float(buff[14]),float(buff[15])]])
    
    time.sleep(0.1)

    # if kaydet == 1:
    #     if t%dt==0 and Dint<Dfin:
    #         Dint=Dint+ds
    #         yaz(64,[int(Dint*4)])
    #     elif Dint>=Dfin:
    #         df.to_excel(f"{isim}.xlsx")
    #         kaydet=0
Streamlit real time

DB CAFE

1 streamlit real time chart[편집]

1.1 샘플[편집]
